59 lines
2.5 KiB
Text
59 lines
2.5 KiB
Text
= Ruckus ICX switches 7150, 7250, 7450, 7650, 7750, 7850 diagnostics commands
|
|
Author: Yuri Slobodyanyuk, https://www.linkedin.com/in/yurislobodyanyuk/
|
|
:homepage: https://yurisk.info
|
|
|
|
|
|
|
|
NOTE: When in doubt, use Cisco IOS-like commands, as most are equivalent.
|
|
|
|
.Ruckus ICX switch (former Brocade) diagnostics commands
|
|
|
|
[cols=2, options="header"]
|
|
|===
|
|
|Command
|
|
|Description
|
|
|
|
|*show version*
|
|
|Show the switch hardware version, whether stack or not, uptime, serial number, firmware version.
|
|
|
|
|*show flash*
|
|
|Show boot images stored in the flash - primary and secondary boot images and thier versions, flash free space.
|
|
|
|
|*show dir* OR *show files*
|
|
|List contents of the flash - in addition to boot images, also startup configuration file and anything else stored in the flash.
|
|
|
|
|*show boot*
|
|
|Show in what sequence boot images will be tried on reload, usually Primary then Secondary.
|
|
|
|
|*show cpu tasks*
|
|
|Show last 1 second CPU load per task in percents.
|
|
|
|
|*show cpu histogram waittime* AND *show cpu histogram holdtime*
|
|
|Shows the task CPU usage in each bucket. This includes how many times a task run time or hold time falls in each bucket, and the maximum run time and total run time for each bucket. Hold time - The time that the task is holding the CPU without yield. Wait time - The time that the task is waiting for execution.
|
|
|
|
|*show fdp neighbor* AND *show fdp neighbor detail*
|
|
| Show CDP or/and LLDP neighbors, provided any of these protocols are enabled on the switch.
|
|
|
|
|*show run*
|
|
|Show the running configuration.
|
|
|
|
|*show statistics brief*
|
|
|Show stats for all interfaces - cumulative packets in/out, error in/outs.
|
|
|
|
|*show statistics ethernet <port number>*
|
|
|Show detailed statistics for the interface _<port number>_ - packets/bytes in/out, bad packets/frames, CRC count, Collisions, Interface bandwidth utilization in percents, current interface utilization in bits/sec.
|
|
|
|
|*show spanvlan <vlan number>*
|
|
|Show spanning tree status (optionally) for a given VLAN - who is root, interface cost, state (forwarding, disabled) of each interface.
|
|
|
|
|*show vlan <vlan number>*
|
|
|Show VLAN information - spanning tree status (on/off), SPT priority, which ports are tagged and which are not, Uplink ports if any.
|
|
|
|
|*show inline power*
|
|
|Show power over the Ethernet status for each interface, if enabled/supported.
|
|
|
|
|*show int <interface name>*
|
|
|Detailed interface statistics like `show int` in Cisco equipment - port uptime, MAC address, configured vs actual speed/duplex, MDI mode, STP state, input/output rate in bits/sec,
|
|
|
|
|===
|
|
|