From 79d197e13ccf1d0f66c923334f589752c19128b3 Mon Sep 17 00:00:00 2001 From: Larry Rosenman Date: Thu, 4 Apr 2019 16:09:06 -0500 Subject: [PATCH] add OPNSense instructions --- README.md | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/README.md b/README.md index 0a7ef69..021eb5d 100644 --- a/README.md +++ b/README.md @@ -308,6 +308,14 @@ There is a whole thread on this at [DSLreports](http://www.dslreports.com/forum/ However, I don't think this works for everyone. I had to explicitly tag my WAN traffic to VLAN0 which wasn't supported on my switch. ## OPNSense / FreeBSD +For OPNSense (tested and working on 19.1): +follow the pfSense instructions, EXCEPT: +1) modify pfatt.sh to set OPNSENSE='yes' +2) put the pfatt.sh script into `/usr/local/etc/rc.syshook.d/early` as `99-pfatt.sh` +3) do *NOT* modify config.xml, nor do any of the duid stuff +4) note: You *CAN* use IPv6 Prefix id 0, as OPNSense does *NOT* assign a routeable IPv6 address to ngeth0 + + I haven't tried this with OPNSense or native FreeBSD, but I imagine the process is ultimately the same with netgraph. Feel free to submit a PR with notes on your experience.