hhf/pfatt
1
0
Fork 0
Code Issues 26 Pull requests Projects Releases Packages Wiki Activity Actions

add note about existing VLANs

Browse source 
closes #8
This commit is contained in:
Austin Robertson 2018-11-04 10:43:15 -06:00 committed by GitHub
parent ac24e30724
commit c9c300eea3
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 1 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
README.md
View file

@ -111,7 +111,7 @@ If you only have two NICs, you can buy this cheap USB 100Mbps NIC [from Amazon](
5. Prepare for console access. 5. Prepare for console access.
6. Reboot. 6. Reboot.
7. pfSense will detect new interfaces on bootup. Follow the prompts on the console to configure `ngeth0` as your pfSense WAN. Your LAN interface should not change. pfSense does not need to manage `$RG_IF` or `$ONT_IF`. I would advise not enabling those interfaces in pfSense as it can cause problems with the netgraph. 7. pfSense will detect new interfaces on bootup. Follow the prompts on the console to configure `ngeth0` as your pfSense WAN. Your LAN interface should not normally change. However, if you moved or re-purposed your LAN interface for this setup, you'll need to re-apply any existing configuration (like your VLANs) to your new LAN interface. pfSense does not need to manage `$RG_IF` or `$ONT_IF`. I would advise not enabling those interfaces in pfSense as it can cause problems with the netgraph.
8. In the webConfigurator, configure the WAN interface (`ngeth0`) to DHCP using the MAC address of your Residential Gateway. 8. In the webConfigurator, configure the WAN interface (`ngeth0`) to DHCP using the MAC address of your Residential Gateway.
If everything is setup correctly, netgraph should be bridging EAP traffic between the ONT and RG, tagging the WAN traffic with VLAN0, and your WAN interface configured with an IPv4 address via DHCP. If everything is setup correctly, netgraph should be bridging EAP traffic between the ONT and RG, tagging the WAN traffic with VLAN0, and your WAN interface configured with an IPv4 address via DHCP.