diff --git a/proxmox_rockpi_install.sh b/proxmox_rockpi_install.sh
new file mode 100644
index 0000000..84dcca9
--- /dev/null
+++ b/proxmox_rockpi_install.sh
@@ -0,0 +1,169 @@
+#!/bin/bash
+# Prerequisites check
+if [ "$(id -u)" != "0" ]; then
+   echo "This script must be run as root" 1>&2
+   exit 1
+fi
+
+# Check if running on Debian
+if [ ! -f /etc/debian_version ]; then
+    echo "This script requires a Debian-based system"
+    exit 1
+fi
+
+# Define variables - MODIFY THESE AS NEEDED
+TARGET=/dev/mmcblk0          # Your SD card device
+MOUNT_POINT=/mnt
+IP_ADDRESS=192.168.0.2       # Your desired IP
+GATEWAY=192.168.0.1         # Your network gateway
+HOSTNAME="pve"              # Your desired hostname
+TIMEZONE="Europe/London"    # Modify to your timezone
+
+# Install required dependencies
+apt update
+apt install -y btrfs-progs dosfstools debootstrap qemu-user-static
+
+# Clean the target device
+echo "Cleaning target device ${TARGET}..."
+dd if=/dev/zero of=${TARGET} bs=1M count=8
+
+# Create partition table
+echo "Creating partition table..."
+(
+echo g      # Create GPT partition table
+echo n      # New partition
+echo        # Default partition number (1)
+echo        # Default first sector
+echo +512M  # Boot partition size
+echo t      # Change partition type
+echo 1      # EFI System
+echo n      # New partition
+echo        # Default partition number (2)
+echo        # Default first sector
+echo        # Use remaining space
+echo w      # Write changes
+) | fdisk ${TARGET}
+
+# Format partitions
+echo "Formatting partitions..."
+mkfs.fat -F32 ${TARGET}p1
+mkfs.btrfs -f ${TARGET}p2
+
+# Create and mount btrfs subvolumes
+echo "Setting up btrfs subvolumes..."
+mount -o compress=zstd ${TARGET}p2 ${MOUNT_POINT}
+btrfs subvolume create ${MOUNT_POINT}/@
+btrfs subvolume create ${MOUNT_POINT}/@home
+btrfs subvolume create ${MOUNT_POINT}/@root
+umount ${MOUNT_POINT}
+
+# Mount all partitions
+echo "Mounting filesystems..."
+mount -o defaults,compress=zstd,subvol=@ ${TARGET}p2 ${MOUNT_POINT}
+mkdir -p ${MOUNT_POINT}/home
+mount -o defaults,compress=zstd,subvol=@home ${TARGET}p2 ${MOUNT_POINT}/home
+mkdir -p ${MOUNT_POINT}/root
+mount -o defaults,compress=zstd,subvol=@root ${TARGET}p2 ${MOUNT_POINT}/root
+mkdir -p ${MOUNT_POINT}/boot/efi
+mount ${TARGET}p1 ${MOUNT_POINT}/boot/efi
+
+# Debootstrap
+echo "Running first stage debootstrap..."
+debootstrap --arch=arm64 --foreign --components=main,non-free,contrib \
+    --include=locales bullseye ${MOUNT_POINT} \
+    https://mirrors.tuna.tsinghua.edu.cn/debian
+
+# Second stage
+echo "Preparing for second stage debootstrap..."
+cp /usr/bin/qemu-aarch64-static ${MOUNT_POINT}/usr/bin/
+LANG=C.UTF-8 chroot ${MOUNT_POINT} /usr/bin/qemu-aarch64-static /bin/bash -c "/debootstrap/debootstrap --second-stage"
+
+# Configure fstab
+echo "Configuring fstab..."
+cat > ${MOUNT_POINT}/etc/fstab << EOF
+UUID=$(blkid -s UUID -o value ${TARGET}p2) / btrfs defaults,compress=zstd,subvol=@ 0 0
+UUID=$(blkid -s UUID -o value ${TARGET}p2) /home btrfs defaults,compress=zstd,subvol=@home 0 0
+UUID=$(blkid -s UUID -o value ${TARGET}p2) /root btrfs defaults,compress=zstd,subvol=@root 0 0
+UUID=$(blkid -s UUID -o value ${TARGET}p1) /boot/efi vfat defaults 1 2
+EOF
+
+# Configure networking
+echo "Configuring network..."
+cat > ${MOUNT_POINT}/etc/network/interfaces << EOF
+source /etc/network/interfaces.d/*
+auto lo
+iface lo inet loopback
+
+auto eth0
+iface eth0 inet static
+    address ${IP_ADDRESS}/24
+    gateway ${GATEWAY}
+EOF
+
+# Set hostname
+echo ${HOSTNAME} > ${MOUNT_POINT}/etc/hostname
+echo "${IP_ADDRESS} ${HOSTNAME} ${HOSTNAME}.local" >> ${MOUNT_POINT}/etc/hosts
+
+# Enter chroot environment
+echo "Entering chroot environment..."
+for i in /dev /dev/pts /proc /sys /run; do
+    mount -B $i ${MOUNT_POINT}$i
+done
+
+# Chroot operations
+cat > ${MOUNT_POINT}/chroot-setup.sh << 'EOF'
+#!/bin/bash
+
+# Configure locale and timezone
+sed -i -e 's/# en_US.UTF-8 UTF-8/en_US.UTF-8 UTF-8/' /etc/locale.gen
+echo 'LANG="en_US.UTF-8"' > /etc/default/locale
+dpkg-reconfigure -f noninteractive locales
+update-locale LANG=en_US.UTF-8
+
+# Install required packages
+apt update
+apt install -y grub-efi linux-image-arm64 openssh-server sudo haveged \
+    zram-tools tmux bash-completion armbian-bsp-cli-rockpi-4b dialog \
+    armbian-firmware linux-image-current-rockchip64 \
+    linux-dtb-current-rockchip64 linux-u-boot-rockpi-4b-current \
+    wpasupplicant btrfs-progs
+
+# Install Proxmox
+apt install -y proxmox-ve pve-kernel-helper ifupdown2 openvswitch-switch
+
+# Configure bootloader
+KERNEL=$(ls /boot/vmlinuz-* | sort -V | tail -n1 | sed 's/\/boot\/vmlinuz-//')
+echo "Setting up boot for kernel ${KERNEL}..."
+
+# Initialize Proxmox boot tool
+proxmox-boot-tool init
+
+# Clean up
+apt clean
+EOF
+
+chmod +x ${MOUNT_POINT}/chroot-setup.sh
+LANG=C.UTF-8 chroot ${MOUNT_POINT} /usr/bin/qemu-aarch64-static /bin/bash /chroot-setup.sh
+
+# Cleanup and unmount
+echo "Cleaning up..."
+rm ${MOUNT_POINT}/usr/bin/qemu-aarch64-static
+rm ${MOUNT_POINT}/chroot-setup.sh
+sync
+umount -R ${MOUNT_POINT}
+
+echo "Installation complete. Please configure U-Boot as follows:"
+cat << 'EOF'
+In U-Boot console:
+env default -f -a
+setenv fdtover_addr_r 0x01fc0000
+setenv fdtoverfile rockchip/overlay/rockchip-spi-jedec-nor.dtbo
+saveenv
+load mmc 0:1 $fdt_addr_r /dtb/$fdtfile
+load mmc 0:1 $fdtover_addr_r /dtb/$fdtoverfile
+load mmc 0:1 $kernel_addr_r /EFI/BOOT/BOOTAA64.EFI
+fdt addr $fdt_addr_r
+fdt resize 80000
+fdt apply $fdtover_addr_r
+bootefi $kernel_addr_r $fdt_addr_r
+EOF
\ No newline at end of file