![image.png](https://git.hhf.technology/hhf/setting-up-game-server-routing-with-unraid-and-vps/raw/branch/main/image.png/image.png)

## Prerequisites

Before starting, ensure you have:
- An Unraid server
- A VPS
- Tailscale installed on both Unraid and VPS
- Root/sudo access on both machines
- Basic command line knowledge

## Part 1: Initial Setup

### On Both Machines

1. First, install Tailscale if you haven't already:
   - On Unraid: Install from Community Applications
   - On VPS: Follow installation guide at [Tailscale's website](https://tailscale.com/download)

2. Log into Tailscale on both machines:
   ```bash
   tailscale up
   ```

3. Note down the Tailscale IPs:
   ```bash
   tailscale ip -4
   ```
   Save both IPs - you'll need them later.

## Part 2: Unraid Configuration

### Step 1: Create the Configuration Script

1. SSH into your Unraid server or use the terminal from the web interface.

2. Create a new directory for our scripts:
   ```bash
   mkdir -p /boot/custom/scripts
   cd /boot/custom/scripts
   ```

3. Create the configuration script:
   ```bash
   nano unraid-config.sh
   ```

4. Copy the Unraid script from above into this file.

### Step 2: Configure the Script

1. Modify these variables in the script:
   ```bash
   VPS_IP="your.vps.ip.address"
   GAME_SUBNET="172.16.0.0/24"  # Adjust if your subnet is different
   ```

2. Make the script executable:
   ```bash
   chmod +x unraid-config.sh
   ```

### Step 3: Run the Configuration

1. Execute the script:
   ```bash
   ./unraid-config.sh
   ```

2. Watch for any error messages in green or red text.

### Step 4: Make Configuration Persistent

1. Create a startup script:
   ```bash
   nano /boot/config/go
   ```

2. Add this line:
   ```bash
   /boot/custom/scripts/unraid-config.sh
   ```

3. Make it executable:
   ```bash
   chmod +x /boot/config/go
   ```

## Part 3: VPS Configuration

### Step 1: Initial VPS Setup

1. SSH into your VPS:
   ```bash
   ssh username@your.vps.ip
   ```

2. Create a directory for the script:
   ```bash
   mkdir ~/scripts
   cd ~/scripts
   ```

### Step 2: Create the Configuration Script

1. Create the script file:
   ```bash
   nano vps-config.sh
   ```

2. Copy the VPS script from above into this file.

### Step 3: Configure the Script

1. Modify these variables:
   ```bash
   UNRAID_TAILSCALE_IP="your.unraid.tailscale.ip"
   WAN_INTERFACE="eth0"  # Change if your interface is different
   ```

2. Make the script executable:
   ```bash
   chmod +x vps-config.sh
   ```

### Step 4: Run the Configuration

1. Execute the script:
   ```bash
   sudo ./vps-config.sh
   ```

2. Check for any error messages.

## Part 4: Verification and Testing

### Step 1: Check Connectivity

1. From your Unraid server, ping the VPS through Tailscale:
   ```bash
   ping your.vps.tailscale.ip
   ```

2. From the VPS, ping your Unraid server:
   ```bash
   ping your.unraid.tailscale.ip
   ```

### Step 2: Test Game Server Ports

1. Check if the ports are open:
   ```bash
   # On VPS
   sudo netstat -tulpn | grep LISTEN
   ```

2. Test UDP ports (8766, 8767, 16261, 19132):
   ```bash
   # From another machine
   nc -uvz your.vps.ip 8766
   ```

3. Test TCP port ranges (16262, 27015-27050, 25500-25600):
   ```bash
   nc -vz your.vps.ip 27015
   ```

## Common Issues and Troubleshooting

### Issue 1: Ports Not Forwarding
- Check iptables rules:
  ```bash
  sudo iptables -L -n -v
  sudo iptables -t nat -L -n -v
  ```
- Verify IP forwarding is enabled:
  ```bash
  cat /proc/sys/net/ipv4/ip_forward
  ```

### Issue 2: Tailscale Connectivity
- Check Tailscale status:
  ```bash
  tailscale status
  ```
- Verify routes:
  ```bash
  ip route show
  ```

### Issue 3: Game Server Can't Connect
- Check server logs
- Verify firewall rules
- Ensure correct IP forwarding
- Check Tailscale ACLs

## Maintenance

### Regular Checks
1. Monitor system logs:
   ```bash
   journalctl -f
   ```

2. Check iptables rules periodically:
   ```bash
   sudo iptables-save > rules-backup.txt
   ```

3. Keep Tailscale updated on both machines.

## Security Considerations

1. Keep SSH ports secured and use key-based authentication
2. Regularly update both Unraid and VPS systems
3. Monitor traffic patterns for unusual activity
4. Keep backups of your configuration files
5. Use strong passwords for all services

## Conclusion

Your game server routing setup should now be complete and working. This configuration provides:
- Secure routing through Tailscale
- Proper traffic separation
- Optimized game server connectivity
- Persistent configuration across reboots

Remember to test thoroughly before deploying game servers, and always keep backups of your configurations.